2014-2018 BMW F30 F31 328D 328Dx - N47 Turbo Diesel - Performance DDE ECU Tuning
N47 ECU performance tune for 2014-2018 BMW F30 / F31 328d and 328dX.
328D N47 Stage 1 performance flash tune gains:
- Horsepower: +50WHP
- Torque: +100WTQ
Performance tuning modifies torque limiter maps, boost levels, fuel maps and more. All to help safely increase HP/TQ, while keeping good drive-ability and factory fail-safes/limp protection in place. Gains may vary car to car based on conditions and state of the vehicle.
- We do not offer EGR - DPF - DEF disable/delete/bypass tuning.
- We do not offer tuning services to the state of California.
We have 2 methods of having this N47 DDE tune installed (Flash Type Selection).
328D N47 ECU TUNE BENCH FLASH:
- Remove the DDE/ECU and mail it in. We will create a full backup image of your ECU without opening the lid or any physical damage to the ECU at all. We then upload our tune and mail the DDE/ECU back.
328D N47 REMOTE TUNE DIY FLASH:
- No downtime!!! With this option, once an order is placed, we will ship you an ENET cable, that cable connects to your vehicle's OBD2 port and Ethernet port on the laptop. The remote flash option includes the cost of the cable (which is yours to keep).
-We will send you a link to download our OBD2 flasher software in an email after your order is placed. Once you have the cable and flasher software, you can then follow instructions to request your tuning file via email. After you receive your tuning file, you can then flash it your self anytime you'd like, if you have technical difficulties and cant figure it out, we can connect remotely via TeamViewer and assist. Be sure to type in your VIN at checkout.
-You will need a Windows 8 or newer laptop (Apple, Chromebooks are not supported)
Vehicle Fitment:
2014 - 2018 3' F30, 328d, Sedan, N47N, USA, (3D33)
2014 - 2018 3' F30, 328dX, Sedan, N47N, USA, (3D53)
2014 - 2018 3' F31, 328dX, Touring, N47N, USA, (3K53)
Please print out the tuning form below and mail it in with your DDE. If you're doing a remote flash you can email it.
Tax excluded. Shipping calculated at checkout
BMW N47 ECU Tuning FAQs
Why is DUDMD Tuning's Remote Flash Option Better Than the Competition?
Why is DUDMD Tuning's Remote Flash Option Better Than the Competition?
DUDMD Tuning's remote flash tuning service distinguishes itself from the competition for several compelling reasons, tailored to provide BMW owners with a superior experience in enhancing their vehicle's performance:
- Ease and Convenience: Our service is designed to empower you with the ability to flash your BMW's ECU by yourself, at any time you find convenient. This self-service capability ensures you're not tied to scheduling appointments or waiting on a service provider, offering unparalleled flexibility to update your vehicle’s performance whenever you choose.
- Versatility of the ENET Cable: Unlike the limited functionality of a one-time use handheld device, the ENET cable we recommend is a multipurpose tool. It's compatible with a wide range of software applications for diagnostics, troubleshooting, live data monitoring, coding, and working with BMW-specific platforms like ISTA and Esys. This cable isn't just for a single ECU flash—it serves as a valuable tool for ongoing vehicle maintenance and customization, providing significant utility and value beyond the initial tuning process.
- Cost-Effectiveness: Many tuning services require the purchase of proprietary handheld devices, adding $200-$300 to the cost of tuning, for a tool that becomes redundant after use. DUDMD Tuning eliminates this need, offering a more affordable and efficient solution. Our remote flash tuning negates the extra expense of unnecessary hardware, making performance upgrades more accessible and budget-friendly.
- Comprehensive Engine Support: We stand out in our ability to remotely flash all N47 engines, including models from 2016 to 2018. Our technology surpasses the limitations faced by many handheld units, which often cannot support the DDE with EDC17C76 via OBD2 found in these newer models. This capability ensures that a wider range of BMW owners can benefit from our tuning services, even for models that are typically challenging to tune with standard tools.
DUDMD Tuning's approach to remote flash tuning is designed to offer ease of use, versatility, cost savings, and broad compatibility. By choosing our service, you're not just enhancing your vehicle's performance; you're also investing in a solution that provides ongoing value and support for a wide range of BMW models, including those with the latest N47 engines. Our commitment to convenience, affordability, and extensive engine support sets us apart as the preferred choice for BMW tuning.
How can I tell if my car is a N47 powered diesel BMW?
For those interested in BMW models equipped with diesel engines in the USA, specifically from 2014 to 2018, the N47 engine was utilized in a select range of models, providing a blend of performance and efficiency characteristic of BMW's engineering. Here are the details for the models you mentioned, equipped with the N47 diesel engine:
F30 328d and F30 328d xDrive (2014-2018):
- The F30 328d and its all-wheel-drive counterpart, the 328d xDrive, were part of BMW's 3 Series lineup. Offering a balance of luxury, efficiency, and performance, these models were powered by the N47 2.0-liter four-cylinder diesel engine, which was known for its fuel efficiency and torque-rich performance.
F31 328d and F31 328d xDrive (2014-2018):
- The F31 328d and 328d xDrive were the wagon (Touring) variants of the 3 Series, equipped with the same N47 diesel engine. These models offered the practicality of a wagon with the added benefit of diesel efficiency, making them a compelling choice for those needing more space without compromising on performance.
F25 X3 xDrive28d (2014-2018):
- The F25 X3 xDrive28d brought the efficiency and torque of the N47 diesel engine to BMW's compact SUV segment. Aimed at drivers seeking a blend of utility, efficiency, and driving pleasure, the X3 xDrive28d provided a versatile option for both city driving and adventure, thanks to its diesel engine's performance characteristics and BMW's xDrive all-wheel-drive system.
These models, equipped with the N47 diesel engine, were part of BMW's effort to offer more fuel-efficient and environmentally friendly options in the U.S. market. It's important for enthusiasts and potential buyers to note that while these models were available with the N47 engine, ongoing maintenance and understanding the characteristics of diesel engines are crucial for optimizing performance and longevity. For the most accurate and up-to-date information, consulting with a BMW dealer or specialist is recommended.
What is a BENCH FLASH method and how does it work to install my N47 ECU Tune?
The BENCH Flash method is a technique used for tuning or reprogramming the Engine Control Unit (ECU) of a vehicle to enhance its performance, fuel efficiency, or other parameters. When it comes to installing an N47 ECU Tune, specifically with guidelines from DUDMD Tuning, the process involves several key steps. These steps are designed to ensure that the vehicle's ECU is properly modified and reinstalled for optimal performance. Here's a general overview of how the BENCH Flash method works, along with the process suggested by DUDMD Tuning for N47 ECUs:
Steps and Processes
- ECU Removal: The first step involves safely removing the ECU (also known as DDE in BMW terminology) from the vehicle. This step requires a certain level of technical knowledge and the right tools to access the ECU without damaging any vehicle components.
- Preparation for Shipping: Once the ECU is removed, it needs to be securely packaged for shipping. This typically involves wrapping the ECU cushioning, then place it in a box to prevent damage during transit.
- Shipping to DUDMD Tuning: The packaged ECU is then shipped to DUDMD Tuning. The address and shipping instructions are usually located on the tuning form.pdf in the item description. It's recommended to use a reliable shipping service with tracking and insurance options.
- Tuning Process: Upon receiving the ECU, DUDMD Tuning performs the BENCH Flash tuning. This process involves connecting the ECU to a specialized tuning bench that allows the tuner to read the existing firmware and backing up all of the original ECU data, modify it with the new tune, and then write the modified firmware back to the ECU. This step optimizes various parameters such as fuel injection timing, boost pressure, and ignition timing to achieve the desired performance enhancements.
- Return Shipping: The tuned ECU is then packaged and shipped back to the customer. Return shipping is free with USPS Priority Mail or UPS Ground. UPS Express return shipping is available at an extra fee when you place your order.
- ECU Reinstallation: The final step involves the customer reinstalling the ECU into their vehicle. Care must be taken to securely reconnect all connections and mount the ECU properly.
BMW Models in the USA (2014-2018) Using the N47 ECU
For the years 2014 to 2018, the following BMW models in the USA were equipped with the N47 diesel engine and hence would use an N47 ECU:
- F30 328d and 328d xDrive: The 3 Series sedans that offered a blend of performance and efficiency.
- F31 328d and 328d xDrive: The Sports Wagon variant of the 3 Series, providing additional cargo space without sacrificing the driving dynamics.
- F25 X3 xDrive28d: The X3 SAV (Sports Activity Vehicle) that combined the utility of an SUV with the performance and efficiency of a diesel engine.
This tuning process is tailored for enthusiasts looking to enhance their vehicle's performance while maintaining reliability. Always ensure that modifications comply with local regulations and are performed by professionals or under expert guidance.
What is a REMOTE FLASH method and how does it work to install my N47 ECU Tune?
The remote OBD2 flashing method provided by DUDMD Tuning offers BMW owners a convenient and efficient way to upgrade their vehicle's performance without the need to remove the ECU/DDE or experience any significant downtime. This DIY method is particularly appealing for owners of specific BMW models equipped with the N47 turbo diesel engine, such as the F30 328d and 328d xDrive, F31 328d and 328d xDrive, and the F25 X3 xDrive28d. Here's an overview of the process, highlighting key terms and requirements:
Requirements
- Compatible Vehicle: The vehicle must be one of the specified models with the N47 engine, such as the F30 328d (and 328dx), F31 328d (and 328dx), or F25 X3 28d.
- Windows Laptop: A laptop running Windows 8 or newer, equipped with an Ethernet port, is required for the process. If your laptop doesn't have an ethernet port, you can use a USB to Ethernet adapter.
- ENET Cable: Included at no charge with your remote flash purchase. This is a specialized cable that connects your vehicle's OBD2 port to the Ethernet port on your laptop. It's essential for facilitating the communication between your vehicle's DDE and the tuning software.
- Internet Connection: A stable internet connection is necessary as the tuning process involves remotely downloading the tune and uploading it to the DDE through the vehicle's OBD2 port.
Steps for Remote OBD2 Flashing
- Preparation: Ensure your Windows laptop is fully charged or connected to a power source. Download any required software provided by DUDMD Tuning, which is typically used for reading the vehicle's current software state and facilitating the flashing process.
- Vehicle Setup: The vehicle should be in a safe, stationary position. Ensure that the ignition is on but do not start the engine. This ensures that the DDE is powered and communicative.
- Connecting the ENET Cable: Connect one end of the ENET cable to your vehicle's OBD2 port, usually found under the dashboard on the driver's side. Connect the other end to the Ethernet port of your laptop.
- Software Communication: Launch the software provided by DUDMD Tuning on your laptop. The software will guide you through the process of identifying your vehicle and its current ECU/DDE software version. Follow the prompts to ensure proper communication between your laptop and the vehicle's DDE.
- Downloading and Flashing the Tune: Once the vehicle is identified, you will email that data to DUDMD Tuning for file processing. After the tune file is emailed back to you, download the appropriate tune from DUDMD Tuning's email . The tuning file is based on your vehicle model and current software version. The process involves uploading this tune to your vehicle's DDE through the OBD2 port, effectively reprogramming it with the new performance parameters.
- Completion and Testing: After the flashing process is complete, the software will notify you. It's essential to follow any final instructions provided, such as turning off the ignition and then starting the engine to ensure the new tune is correctly applied. Test your vehicle in a safe environment to confirm the performance enhancements.
Advantages
- Convenience: This method eliminates the need to physically remove and ship your DDE, offering a significant advantage in terms of time and effort.
- No Downtime: Your vehicle remains operational and can be driven almost immediately after the flashing process, minimizing any inconvenience.
- DIY Approach: Provides a sense of accomplishment and control over the tuning process, with support from DUDMD Tuning's detailed instructions and customer service.
By following this remote OBD2 flashing DIY method, owners of N47 turbo diesel BMWs can enjoy enhanced performance and efficiency without the traditional complexities associated with ECU tuning.
Can I Use My Own ENET Cable for Remote Flashing?
Q: I already have an ENET cable. Can I use it for the remote flashing process with DUDMD Tuning, or do I need to wait for the ENET cable that comes with my remote flash option purchase?
A: Yes, you can absolutely use your own ENET cable for the remote flashing process with DUDMD Tuning. When you purchase a remote flash option from DUDMD Tuning, it includes an ENET cable that will be shipped to you as part of the package. However, if you already own an ENET cable and are familiar with its operation, you are encouraged to use it right away for the remote flashing.
Using Your Own ENET Cable:
- Immediate Start: Using your own ENET cable allows you to begin the remote flashing process immediately, without having to wait for the shipping and delivery of the DUDMD Tuning ENET cable. This is particularly beneficial if you are eager to enhance your BMW's performance and do not wish to delay the tuning process.
- Compatibility and Quality: Ensure that your ENET cable is of good quality and compatible with your BMW model. A reliable connection is crucial for a successful remote flashing session, as it involves precise modifications to your vehicle's software.
- Follow Instructions: When you opt to use your own ENET cable, make sure to follow all provided instructions from DUDMD Tuning for the remote flashing process. This ensures that the connection to your BMW's OBD2 port is established correctly and the tuning can be executed smoothly.
Waiting for the DUDMD Tuning ENET Cable:
- Included in Purchase: Remember, an ENET cable is included with your remote flash option purchase from DUDMD Tuning. If you prefer to use the provided cable, it will be shipped to you directly. This option ensures compatibility and reliability, as the cable is guaranteed to work with DUDMD Tuning's remote flashing software and procedures.
- Backup Cable: Having an extra ENET cable can be beneficial. You can keep the additional cable as a backup or use it for other purposes related to vehicle diagnostics and coding.
In summary, customers who already possess an ENET cable can proceed with the remote flashing process immediately, leveraging the convenience and efficiency of DUDMD Tuning's services without delay. For those who prefer to wait for the DUDMD Tuning supplied cable, rest assured it is designed to ensure a seamless and successful tuning experience for your BMW.
What is the Turnaround for a Bench Flash Tune?
When opting for a Bench Flash Tune with DUDMD Tuning, we understand that time is of the essence, and you're eager to experience the enhanced performance of your vehicle. To ensure a swift and efficient process, here's what you need to know about the turnaround time:
- Shipping to DUDMD Tuning: We recommend that customers use a shipping service that offers either overnight or 2-3 day shipping options to minimize the wait time. The quicker your ECU arrives at our facility, the sooner we can begin the tuning process.
- Processing Time: DUDMD Tuning prioritizes your needs and processes ECUs on the same business day they arrive, provided they arrive within our working hours. Our commitment is to ensure minimal downtime for your vehicle.
- Return Shipping: After your ECU has been successfully tuned, we typically ship it back to you on the same business day. Free return shipping is provided via UPS Ground or USPS Priority Mail, both of which normally take 2-3 days for delivery. We understand, however, that some customers may need their ECU returned even faster.
- Expedited Return Option: For those who require their tuned ECU back as soon as possible, we offer a UPS Express option for an additional charge. This service ensures 1-day express return shipping, further reducing the wait time.
Please note, while DUDMD Tuning takes every step to ensure your ECU is tuned and shipped back promptly, we are not responsible for any shipping delays once the package is in the possession of the carrier. Delays due to the carrier, adverse weather conditions, or other unforeseen circumstances are beyond our control.
In summary, by choosing expedited shipping to and from DUDMD Tuning and taking advantage of our same-day processing, you can expect a quick and efficient turnaround for your Bench Flash Tune. This ensures that you'll be back on the road, enjoying your vehicle's improved performance, in the shortest time possible.
Supported DDE Models for BMW N47 Tuning
Q: What DDE Models are supported for BMW N47 ECU Tuning?
A: For BMW N47 tuning, specifically for vehicles equipped with the N47 turbo diesel engine in the USA, the supported Digital Diesel Electronics (DDE) models are crucial for ensuring compatibility and optimal performance enhancement. The DDE, essentially the ECU (Engine Control Unit) for BMW's diesel engines, controls various aspects of the engine's operation, including fuel injection, ignition timing, and turbocharger boost. For the BMW N47 engine in the 2014-2018 model years, two primary Bosch EDC (Electronic Diesel Control) units are supported:
- Bosch EDC17C56 - This DDE model is found in the 2014-2015 model years of BMW vehicles equipped with the N47 engine. It is responsible for managing the engine's functions and optimizing performance and emissions. The EDC17C56 unit is known for its advanced control features and robustness, making it a suitable candidate for performance tuning.
- Bosch EDC17C76 - For the 2016-2018 model years, BMW N47 engines are equipped with the EDC17C76 DDE model. This updated version of the DDE unit provides enhanced processing power and capabilities, offering improved efficiency and potential for fine-tuning engine performance parameters.
Supported BMW Models
The following BMW models in the USA, equipped with the N47 turbo diesel engine and corresponding DDE models, are supported for tuning:
- F30 328d and F30 328d xDrive (328dx): These models represent the sedan variant of the 3 Series, offering a balance of luxury and performance with diesel efficiency.
- F31 328d and F31 328d xDrive (328dx): The F31 is the wagon version of the 3 Series, providing additional cargo space without compromising on the driving experience.
- F25 X3 xDrive28d: This model is BMW's compact SUV, or Sports Activity Vehicle (SAV), combining the utility and versatility of an SUV with the performance of the N47 diesel engine.
Conclusion
For owners of these specific BMW models with N47 engines looking to enhance their vehicle's performance through tuning, it's essential to ensure that their DDE (ECU) model is either the Bosch EDC17C56 or EDC17C76. These units are fully supported for performance tuning, offering opportunities for improved power, torque, and efficiency, while maintaining the sophisticated engineering and reliability expected from BMW diesel engines. Tuning solutions tailored to these DDE models can unlock the true potential of the N47 engine, providing an exhilarating driving experience.
What is BMW DDE?
The BMW DDE (Digital Diesel Electronics) is an engine management system used in BMW diesel-powered vehicles. It is responsible for controlling aspects of the diesel engine's operation, including fuel injection, air management, exhaust after-treatment, and various other functions critical for efficient and clean engine performance. The system ensures optimal engine performance, fuel efficiency, and compliance with emission standards by continuously monitoring and adjusting the engine's parameters.
DDE technology has evolved through various versions over the years, with each new iteration bringing improvements in terms of performance, emissions control, and fuel efficiency. It includes sophisticated software and hardware components, such as sensors and actuators, to precisely control the combustion process in diesel engines. This system is part of BMW's commitment to advanced diesel technology, offering drivers a balance between performance and environmental responsibility.