Please print out this form and mail it in with your DME. DME will not be flashed until the form is filled out and sent to us. Thank you.
- We do not offer tuning for emission components delete, we do not disable catalytic converter or secondary air pump systems.
- We do not offer tuning services to the state of California.
Stage 1 tuning is for all stock parts/components BMW S63TU V8 Twin Turbo vehicles like the F10 M5, F06/F12/F13 M6, F85 X5M, F86 X6M
Performance Gains from Stock software to Stage 1:
105WHP @ 5500RPM
105WTQ @ 4500RPM
on our Mainline ProHub5000 dynamometer. The engine will produce around 700 crank HP with stage 1 tuning on 100% factory hardware.
Performance tuning modifies torque limiter maps, boost levels, fuel maps, ignition timing advance maps and more. All to help safely increase HP/TQ, while keeping good drive-ability and factory fail-safes/limp protection in place
We have 2 methods of having this tune installed (Flash Type Selection).
- BENCH FLASH: Remove the DDE/ECU and mail it in. We will create a full backup image of your ECU without opening the lid or any physical damage to the ECU at all. We then upload our tune and mail the DDE/ECU back. This is the safest way, as we can have a full backup of the entire ECU content.
- REMOTE FLASH: No downtime!!! With this option, once an order is placed, we will ship you a cable, that cable connects to a laptop and we are able to remote into your computer to flash the car. The remote flash option includes the cost of the cable (which is yours to keep). In some cases, not all cars can be flashed this way. In that case, you will have to ship your ECU/DDE to us. *You will need a Windows 8 or newer laptop and WIFI to flash remotely (Apple, Chromebooks are not supported)* For F-series vehicles, we use ENET cable for flashing and it will require you to have an ethernet port on your laptop available for connection to the vehicle.
